To estimate epoxy for an olive wood river table, measure the space the mixed resin will occupy. For a rectangular channel, multiply length by width by pour depth. With all three measurements in centimetres, divide the result by 1,000 to get litres. For a changing live-edge gap, calculate smaller sections and add them together. The photograph shows two separate olive wood pieces with an uneven opening between them. That opening is the measurement to plan around; the total outside width of the two-piece layout includes the wood as well. 

What is the epoxy volume formula?

Mixed epoxy volume in litres = length in cm × channel width in cm × pour depth in cm ÷ 1,000. Keep the units consistent. Convert a depth of 20 mm to 2 cm before using this formula. The answer is the combined resin-and-hardener volume. Use the selected epoxy manufacturer's instructions to divide that volume into its two components. 

A worked example for a changing river gap

This is a hypothetical layout for explaining the arithmetic, rather than the dimensions of the photographed pieces. Imagine a 100 cm channel split into four equal 25 cm sections. The estimated average widths of those sections are 6, 8, 10 and 8 cm, and the planned pour depth is 2 cm: 

  • Section 1: 25 × 6 × 2 ÷ 1,000 = 0.30 litres.
  • Section 2: 25 × 8 × 2 ÷ 1,000 = 0.40 litres.
  • Section 3: 25 × 10 × 2 ÷ 1,000 = 0.50 litres.
  • Section 4: 25 × 8 × 2 ÷ 1,000 = 0.40 litres.

Estimated channel volume: 1.60 litres. This calculation covers the modelled channel only. Openings elsewhere in the wood, resin extending around the outside edges, and a separate surface coating each need their own allowance. If section lengths differ, calculate each section with its actual length. 

How do you account for irregular edges?

Arrange the pieces in their intended positions before measuring. Mark regular stations along the channel and take additional measurements where an edge changes sharply. A full-size outline on paper makes these changes easier to record. Follow the resin manufacturer's guidance on estimating irregular spaces and allowing for measuring or handling losses. EcoPoxy's volume-estimation guide describes measurements at several intervals and includes an allowance in its calculator. Check what your chosen calculator already includes before adding another allowance. 

Does this tell you how much to mix at once?

Total project volume and permitted batch size are separate decisions. Use the chosen product's current instructions for mixing ratio, pour depth, batch limits, working conditions and protective equipment. A calculated volume does not establish a suitable single pour. Record the channel, voids and any coating as separate lines so the plan is easy to review. 

Choose the layout before ordering resin

Compare olive wood pieces and river sets, then use the dimensions and included quantity stated in the individual listing. For help interpreting the layout, read usable width versus overall size and choosing olive wood for a river table.